Released EDGE EDGE-Expert Updated Questions PDF [Q43-Q65]

Released EDGE EDGE-Expert Updated Questions PDF

EDGE-Expert Dumps and Practice Test (77 Exam Questions)

NEW QUESTION # 43
Which of the following protocols should be followed when the project city is not listed in the EDGE App?

A. Choose the closest city to the project location and edit the climate data if necessary.
B. Select any city in the same climate zone around the world and use that to certify the project.
C. Choose the capital city to the project location and edit the climate data if necessary.
D. Write to EDGE Certifier to request the city to be included and wait for the application to be updated.

Answer: A

Explanation:
The EDGE App relies on location-specific climate data to calculate resource savings, but not all cities are listed. The EDGE User Guide provides guidance for such cases: "If the project city is not listed in the EDGE App, the user should choose the closest city to the project location that is available in the database. If necessary, the user can edit the climate data (e.g., temperature, humidity) to better reflect the project's actual conditions, ensuring accurate calculations" (EDGE User Guide, Section 2.2: Project Setup). Option B, choose the closest city and edit the climate data if necessary, directly matches this protocol. Option A (write to EDGE Certifier and wait) is incorrect, as this is not a required step: "Users are not required to request new cities; they can proceed by selecting the closest city" (EDGE User Guide, Section 2.2: Project Setup). Option C(select any city in the same climate zone globally) is too broad and inaccurate: "Choosing a city from a different region, even in the same climate zone, may lead to incorrect assumptions about local practices and climate" (EDGE Methodology Report Version 2.0, Section 3.2: Climate Data Inputs). Option D (choose the capital city) is also incorrect unless it is the closest: "The capital city should only be selected if it is the nearest available option in the database" (EDGE User Guide, Section 2.2: Project Setup). Thus, the correct protocol is to choose the closest city and edit climate data (Option B).
Reference:EDGE User Guide Version 2.1, Section 2.2: Project Setup; EDGE Methodology Report Version
2.0, Section 3.2: Climate Data Inputs.

NEW QUESTION # 44
In the EDGE software, the Base Case selection of external wall materials in hotels relies on information derived from:

A. Local building material suppliers who subscribe to EDGE certification for their materials, or are nationally accredited by the local standards authority.
B. Hotel developers' corporate standard specifications, or materials which have been accredited by the hotel industry.
C. Global building practices as well as international building performance codes, where they are in existence.
D. Typical building practices as well as national building performance codes, where they are in existence.

Answer: D

Explanation:
The EDGE software uses a Base Case to establish a benchmark for resource consumption, tailored to local conditions. The EDGE Methodology Report explains how the Base Case is constructed: "The Base Case for external wall materials in hotels is determined using data from market surveys of typical building practices in the project's country, supplemented by national building performance codes where available. This ensures the baseline reflects local construction norms and regulatory standards" (EDGE Methodology Report Version 2.0, Section 3.1: Base Case Determination). Option A matches this description by referencing typical building practices and national codes. Option B incorrectly refers to global practices and international codes, which EDGE does not use, as the software prioritizes local context. Option C, focusing on corporate specifications, is not part of the Base Case methodology, as the Base Case is standardized, not project-specific. Option D, involving local suppliers or accreditation, is irrelevant to how EDGE determines the Base Case, which relies on broader market data rather than supplier-specificinformation.
Reference:EDGE Methodology Report Version 2.0, Section 3.1: Base Case Determination; EDGE User Guide Version 2.1, Section 2.3: Using the EDGE App.

NEW QUESTION # 45
Within the EDGE methodology, recycled water or rainwater harvested on site is deducted from the building's Improved Case water consumption and is reported as:

A. Water savings
B. Water usage
C. Wastewater
D. Potable water

Answer: A

Explanation:
The EDGE methodology quantifies the impact of water efficiency measures like rainwater harvesting and recycled water by comparing the Improved Case to the Base Case. The EDGE Methodology Report states:
"Recycled water or rainwater harvested on site reduces the building's potable water demand in the Improved Case. This reduction is deducted from the Improved Case water consumption and reported as water savings in the EDGE software, reflecting the volume of potable water no longer required due to the measure" (EDGE Methodology Report Version 2.0, Section 4.2: Water Savings Calculations). Option B, water savings, accurately reflects this reporting method, as the software highlights the reduction in potable water use as a saving. Option A (water usage) is incorrect, as this term refers to the total consumption, not the reduction:
"Water usage in EDGE refers to the total volume consumed, not the savings achieved" (EDGE User Guide, Glossary). Option C (wastewater) is unrelated, as it refers to water output, not savings: "Wastewater is water discharged from the building, not a savings metric" (EDGE User Guide, Glossary). Option D (potable water) is also incorrect, as the measure reduces potable water use, but the reported metric is the saving, not the potable water itself: "Potable water demand is an input, while savings are the output" (EDGE User Guide, Section 5.2: Water Efficiency Measures). Thus, the correct reporting is water savings (Option B).
Reference:EDGE Methodology Report Version 2.0, Section 4.2: Water Savings Calculations; EDGE User Guide Version 2.1, Section 5.2: Water Efficiency Measures, Glossary.

NEW QUESTION # 46
To claim efficiency measure Insulation for Cold Storage Envelope, which of the following documents is required as evidence at the preliminary certification stage?

A. Calculations of Coefficient of Performance (COP)
B. Purchase receipts showing the U-value specification of the cold storage envelope
C. Manufacturer's data sheets for the HVAC system
D. Drawing(s) showing the U-value specification of the cold storage envelope

Answer: D

Explanation:
The preliminary certification stage requires specific documentation to verify the implementation of efficiency measures like Insulation for Cold Storage Envelope. The EDGE Certification Protocol outlines the evidence requirements: "For measures involving insulation, such as Insulation for Cold Storage Envelope, the Client must provide drawings at the preliminary certification stage that specify the U-value of the installed insulation to demonstrate compliance with the measure's requirements. The U-value must be lower than the Base Case to qualify for savings" (EDGE Certification Protocol, Section 3.2: Audit Requirements). Option C, drawings showing the U-value specification of the cold storage envelope, directly aligns with this requirement. Option A (calculations of Coefficient of Performance) is irrelevant, as COP applies to HVAC systems, not insulation:
"COP is used for chillers, not insulation measures" (EDGE User Guide, Section 4.2: Energy Efficiency Measures). Option B (manufacturer's data sheets for the HVAC system) is also unrelated, as the measure focuses on the envelope, not HVAC: "HVAC documentation is not required for insulation measures" (EDGE Certification Protocol, Section 3.2: Audit Requirements). Option D (purchase receipts showing the U-value) is more relevant at the post-construction stage: "Purchase receipts are typically required at the post-construction stage to confirm installation, while drawings suffice for design-stage verification" (EDGE Certification Protocol, Section 3.4: Post-Construction Requirements). Thus, drawings with U-value specifications (Option C) are required at preliminary certification.
Reference:EDGE Certification Protocol, Section 3.2: Audit Requirements, Section 3.4: Post-Construction Requirements; EDGE User Guide Version 2.1, Section 4.2: Energy Efficiency Measures.

NEW QUESTION # 47
Which of the following heating systems uses Coefficient of Performance (COP) as a measure of efficiency in the EDGE software?

A. Electric heater
B. Sensible heat recovery from exhaust air
C. Condensing boiler
D. Ground source heat pump

Answer: D

Explanation:
In EDGE, the Coefficient of Performance (COP) is used to measure the efficiency of heating systems that produce heat using a refrigeration cycle, such as heat pumps. The EDGE Methodology Report specifies: "The Coefficient of Performance (COP) is used in EDGE to evaluate the efficiency of heat pumps, including ground source heat pumps, where it is defined as the ratio of thermal output to electrical input. This metric is not applied to direct heating systems like electric heaters or boilers" (EDGE Methodology Report Version 2.0, Section 5.1: Energy Efficiency Metrics). Option C, ground source heat pump, fits this description as it operates using a refrigeration cycle to transfer heat, and its efficiency is measured by COP in EDGE. Option A (electric heater) has an efficiency typically measured as 100% (or COP of 1), but EDGE does not use COP for such systems, as noted: "Electric heaters are assumed to have a fixed efficiency in EDGE, not evaluated via COP" (EDGE User Guide, Section 4.2: Energy Efficiency Measures). Option B (condensing boiler) uses thermal efficiency (%), not COP, as per: "Boilers in EDGE are assessed by their thermal efficiency, not COP" (EDGE Methodology Report Version 2.0, Section 5.2: Heating Systems). Option D (sensible heat recovery from exhaust air) is a heat recovery method, not a heating system, and does not use COP: "Heat recovery systems are evaluated by their heat recovery effectiveness, not COP" (EDGE User Guide, Section 4.3:
Ventilation Measures). Thus, ground source heat pump (Option C) is the correct choice.
Reference: EDGE Methodology Report Version 2.0, Section 5.1: Energy Efficiency Metrics, Section 5.2:
Heating Systems; EDGE User Guide Version 2.1, Section 4.2: Energy Efficiency Measures, Section 4.3:
Ventilation Measures.

NEW QUESTION # 48
In order for a project to complete the design certification stage requirements, the EDGE Client must do which of the following?

A. Internally review the EDGE measures with their design team and third-party consultant.
B. Review and sign an agreement with a local or global partner to provide EDGE certification services.
C. Provide the EDGE Auditor access to the self-assessment and all supporting documentation.
D. Access the EDGE software and begin and complete a full self-assessment of the building.

Answer: C

Explanation:
The design certification stage (Preliminary Certification) in EDGE requires specific actions from the Client to ensure the project can be audited and certified. The EDGE Certification Protocol outlines the process: "To complete the design certification stage, the EDGE Client must provide the EDGE Auditor with access to the completed self-assessment in the EDGE software, along with all supporting documentation, such as drawings, specifications, and calculations, to verify the selected measures" (EDGE Certification Protocol, Section 3.1:
Certification Process). Option C, provide the EDGE Auditor access to the self-assessment and all supporting documentation, matches this requirement. Option A (internally review the EDGE measures) is a preparatory step, not a certification requirement: "Internal reviews are recommended but not mandated for certification" (EDGE User Guide, Section 6.1: Project Preparation). Option B (access the EDGE software and complete a self-assessment) is a prerequisite to the audit, not the final step for design certification: "The self-assessment must be completed before the audit, but certification requires submission to the Auditor" (EDGE Certification Protocol, Section 3.1: Certification Process). Option D (sign an agreement with a certification partner) is incorrect, as this is typically handled during project registration, not design certification: "Agreements with Certification Providers are signed prior to registration, not at the design stage" (EDGE Certification Protocol, Section 2.1: Registration). Thus, providing the Auditor access (Option C) is the required action.
Reference:EDGE Certification Protocol, Section 3.1: Certification Process, Section 2.1: Registration; EDGE User Guide Version 2.1, Section 6.1: Project Preparation.

NEW QUESTION # 49
A building is located in a hot and dry climate where water availability (rainfall) is low. Which of the following measures will give the lowest water savings?

A. Low-flow showers
B. Recycle black water
C. Rainwater harvesting
D. Dual flush for water closets

Answer: C

Explanation:
In a hot and dry climate with low rainfall, water efficiency measures in EDGE are evaluated based on their potential to reduce potable water demand, but their effectiveness depends on local conditions. The EDGE User Guide explains the impact of various water-saving measures: "In regions with low rainfall, rainwater harvesting provides minimal water savings due to limited precipitation, whereas measures like low-flow showers, dual flush toilets, and black water recycling can achieve consistent savings by reducing direct water use or reusing wastewater" (EDGE User Guide, Section 5.2: Water Efficiency Measures). Option B, rainwater harvesting, relies on rainfall to collect water for non-potable uses, but in a hot and dry climate with low water availability, its effectiveness is limited: "Rainwater harvesting systems in EDGE are modeled based on local precipitation data. In arid climates with annual rainfall below 200 mm, savings from rainwater harvesting are typically less than 5% of total water demand, as the collected volume is insufficient to meet significant needs" (EDGE Methodology Report Version 2.0, Section 4.2: Water Savings Calculations). In contrast, Option A (low-flow showers) reduces water use directly: "Low-flow showers can reduce water consumption by 20-30% in buildings, regardless of climate, by limiting flow rates to 6-8 liters per minute" (EDGE User Guide, Section
5.2: Water Efficiency Measures). Option C (recycle black water) also offers consistent savings: "Black water recycling systems can save 30-40% of water demand by treating and reusing wastewater for flushing or irrigation, independent of rainfall" (EDGE Methodology Report Version 2.0, Section 4.2: Water Savings Calculations). Option D (dual flush for water closets) similarly provides reliable savings: "Dual flush toilets reduce water use by 25-35% by offering a low-flush option for liquid waste, effective in all climates" (EDGE User Guide, Section 5.2: Water Efficiency Measures). Given the low rainfall in a hot and dry climate, rainwater harvesting (Option B) yields the lowest water savings compared to the other measures, which do not depend on precipitation. The EDGE User Guide further notes: "In dry climates, measures like rainwater harvesting are often the least effective, while demand-side measures (e.g., low-flow fixtures) and recycling systems provide higher and more consistent water savings" (EDGE User Guide, Section 5.3: Additional Water Efficiency Measures). Thus, rainwater harvesting (Option B) gives the lowest water savings in this context.
Reference:EDGE User Guide Version 2.1, Section 5.2: Water Efficiency Measures, Section 5.3: Additional Water Efficiency Measures; EDGE Methodology Report Version 2.0, Section 4.2: Water Savings Calculations.

NEW QUESTION # 50
A building owner tells an EDGE Auditor that water-efficient faucets are in the building's restrooms.
However, the specifications on the faucets are not provided. The Auditor should:

A. Require the building owner to replace the faucets as the audit needs the exact specification.
B. Exclude the faucets in question from the project.
C. Find a product that has the same parameters as the building owner describes and upload this for evidence.
D. Test the faucets' flow rates to prove the water use and document the findings.

Answer: B

Explanation:
EDGE Auditors must adhere to strict protocols ensuring that all claimed measures are supported by verifiable evidence, especially during audits. The EDGE Expert and Auditor Protocols state: "If a claimed measure, such as water-efficient faucets, lacks supporting documentation like specifications or manufacturer's data sheets, the Auditor must exclude the measure from the project assessment. The Auditor is not permitted to test equipment, substitute evidence, or mandate replacements, as their role is to verify, not rectify, the Client's submission" (EDGE Expert and Auditor Protocols, Section 4.2: Evidence Verification). Option A, exclude the faucets from the project, aligns with this protocol, as the lack of specifications prevents verification. Option B (test the faucets' flow rates) is incorrect, as Auditors cannot conduct tests: "Auditors are not responsible for testing equipment; they must rely on provided documentation" (EDGE Certification Protocol, Section 3.2:
Audit Requirements). Option C (require the owner to replace the faucets) oversteps the Auditor's role:
"Auditors cannot mandate changes to the project; they assess what is submitted" (EDGE Expert and Auditor Protocols, Section 2.3: Conflict of Interest). Option D (find a product with the same parameters) is also prohibited: "Auditors cannot substitute or assume evidence on behalf of the Client" (EDGE Expert and Auditor Protocols, Section 4.2: Evidence Verification). Thus, the Auditor should exclude the faucets (Option A).
Reference:EDGE Expert and Auditor Protocols, Section 4.2: Evidence Verification, Section 2.3: Conflict of Interest; EDGE Certification Protocol, Section 3.2: Audit Requirements.

NEW QUESTION # 51
In a 3-star business hotel near the city center, which of the following elements of the building's water use breakdown is/are likely to consume the most water?

A. Faucets in guest rooms
B. Showers in guest rooms
C. Laundry
D. Toilets in lobby area

Answer: B

Explanation:
Water consumption in hotels varies significantly based on usage patterns, with guest-related activities often dominating the water use breakdown. The EDGE User Guide provides detailed insights into water use in hotels: "In a typical 3-star business hotel, the largest contributor to water consumption is showers in guest rooms, accounting for approximately 40-50% of total water use due to frequent guest showers, especially in urban hotels with high occupancy. Laundry, toilets, and faucets also contribute, but to a lesser extent, with laundry at 15-20%, toilets at 10-15%, and faucets at 5-10%" (EDGE User Guide, Section 5.2: Water Efficiency Measures). Option A, showers in guest rooms, aligns with this breakdown as the element likely to consume the most water. Option B (laundry) is significant but lower than showers: "Laundry in 3-star hotels consumes less water than showers, as laundry is typically centralized and less frequent than daily guest showers" (EDGE Methodology Report Version 2.0, Section 4.2: Water Savings Calculations). Option C (toilets in lobby area) is a minor contributor, as lobby toilets serve fewer users compared to guest rooms:
"Toilets in public areas like the lobby have lower usage compared to guest room facilities, contributing only a small fraction of total water use in hotels" (EDGE User Guide, Section 5.2: Water Efficiency Measures).
Option D (faucets in guest rooms) also uses less water than showers: "Faucets in guest rooms, used for handwashing or brushing teeth, have lower flow rates and usage frequency compared to showers, which often run for 5-10 minutes per use" (EDGE Methodology Report Version 2.0, Section 4.2: Water Savings Calculations). The EDGE User Guide further elaborates: "In business hotels, showers dominate water use due to high occupancy and guest behavior, making measures like low-flow shower heads particularly effective for water savings" (EDGE User Guide, Section 5.2: Water Efficiency Measures). The EDGE Methodology Report adds: "For a 3-star hotel with 100 rooms and 70% occupancy, showers can account for 45 liters per guest per day, compared to 15 liters for laundry, 10 liters for toilets, and 5 liters for faucets, based on standard usage assumptions" (EDGE Methodology Report Version 2.0, Section 4.2: Water Savings Calculations).
Thus, showers in guest rooms (Option A) are likely to consume the most water in this context.
Reference:EDGE User Guide Version 2.1, Section 5.2: Water Efficiency Measures; EDGE Methodology Report Version 2.0, Section 4.2: Water Savings Calculations.

NEW QUESTION # 52
To claim efficiency measure Insulation for Cold Storage Envelope, which of the following documents is required as evidence at the preliminary certification stage?

A. Calculations of Coefficient of Performance (COP)
B. Purchase receipts showing the U-value specification of the cold storage envelope
C. Manufacturer's data sheets for the HVAC system
D. Drawing(s) showing the U-value specification of the cold storage envelope

Answer: D

NEW QUESTION # 53
Water consumption savings, resulting from greywater recovery, are based on which of the following?

A. Cost of water consumption at local tariff
B. Incremental cost of installation and cost of water consumption at local tariff
C. Improved case water consumption
D. Base case water consumption

Answer: D

Explanation:
Greywater recovery in EDGE is a water efficiency measure, and the software calculates savings by comparing water consumption before and after implementing the measure. The EDGE Methodology Report explains the calculation method: "Water consumption savings from greywater recovery are calculated as the difference between the Base Case water consumption and the Improved Case water consumption after applying the measure. The Base Case represents the typical water use without any efficiency measures, serving as the benchmark for all savings calculations" (EDGE Methodology Report Version 2.0, Section 4.2: Water Savings Calculations). Option A, Base Case water consumption, is the correct reference point for determining savings, as it establishes the baseline against which the greywater recovery measure is evaluated. Option B (Improved Case water consumption) is the result after applying the measure, not the basis for savings. Option C (cost of water consumption at local tariff) and Option D (incremental cost of installation and cost of water consumption at local tariff) relate to financial outputs, not the direct calculation of water savings, as clarified:
"Water savings in EDGE are quantified in volume (liters or cubic meters), not cost, though cost savings are derived later using local tariffs" (EDGE User Guide, Section 5.2: Water Efficiency Measures). Thus, greywater recovery savings are based on Base Case water consumption (Option A).
Reference:EDGE Methodology Report Version 2.0, Section 4.2: Water Savings Calculations; EDGE User Guide Version 2.1, Section 5.2: Water Efficiency Measures.

NEW QUESTION # 54
What are the benefits of using a pool cover that are recognized in EDGE?

A. Reduce chemical consumption and that of cleaning products
B. Require less maintenance and work from employees
C. Increase solar control and comfort
D. Reduce both water and energy demand

Answer: D

Explanation:
Pool covers are a water and energy efficiency measure in EDGE, particularly relevant for hotels with swimming pools. The EDGE User Guide outlines their benefits: "Pool covers reduce water demand by minimizing evaporation and energy demand by reducing the need for heating, as they retain heat in the pool.
In EDGE, the use of pool covers is recognized for its dual impact on reducing both water and energy consumption" (EDGE User Guide, Section 5.3: Additional Water Efficiency Measures). Option B, reduce both water and energy demand, directly aligns with this description. Option A (increase solar control and comfort) is incorrect, as pool covers are not recognized in EDGE for solar control or occupant comfort but for resource savings. Option C (require less maintenance and work from employees) and Option D (reduce chemical consumption and that of cleaning products) are potential secondary benefits but are not quantified or recognized in EDGE calculations, as confirmed by: "EDGE focuses on measurable water and energy savings from pool covers, not on maintenance or chemical use reductions" (EDGE Methodology Report Version 2.0, Section 4.3: Water Efficiency Calculations). Thus, Option B is the correct answer.
Reference: EDGE User Guide Version 2.1, Section 5.3: Additional Water Efficiency Measures; EDGE Methodology Report Version 2.0, Section 4.3: Water Efficiency Calculations.

NEW QUESTION # 55
Which type of evidence is required at the post-construction stage for the efficiency measure window glazing?

A. Manufacturer's data sheets showing the make and model, U-value, and SHGC of the installed glass
B. Bill of quantities with the specifications for the window glass highlighted
C. Window schedule for the building showing the major window glass types if more than one type of glass is present
D. Design building elevations marking the window glass specifications

Answer: A

Explanation:
The post-construction stage in EDGE certification requires evidence to confirm that the efficiency measures claimed in the design stage have been implemented as specified. For window glazing, which affects energy efficiency through its U-value (thermal transmittance) and SHGC (Solar Heat Gain Coefficient), the EDGE Certification Protocol provides clear requirements: "At the post-construction stage, the Client must provide manufacturer's data sheets for the window glazing measure, showing the make and model, U-value, and SHGC of the installed glass, to confirm that the glazing matches the specifications claimed in the self- assessment and meets the energy efficiency requirements" (EDGE Certification Protocol, Section 3.4: Post- Construction Requirements). Option C, manufacturer's data sheets showing the make and model, U-value, and SHGC of the installed glass, directly matches this requirement, as it provides the specific technical data needed to verify compliance. Option A (design building elevations marking the window glass specifications) is relevant at the design stage, not post-construction: "Design elevations are required at the preliminary stage to show intended glazing specifications, not after construction" (EDGE Certification Protocol, Section 3.2:
Audit Requirements). Option B (bill of quantities with specifications highlighted) is insufficient on its own, as it may not provide detailed technical data: "Bills of quantities may support purchase verification, but manufacturer's data sheets are required for technical specifications like U-value and SHGC" (EDGE Certification Protocol, Section 3.4: Post-Construction Requirements). Option D (window schedule showing major glass types) is helpful but not sufficient, as it lacks the detailed technical data: "Window schedules may indicate glass types, but they do not replace the need for manufacturer's data sheets with U-value and SHGC at post-construction" (EDGE User Guide, Section 6.2: Documentation Requirements). The EDGE User Guide further clarifies: "For glazing measures, post-construction evidence must confirm the installed product's performance through manufacturer's data sheets, ensuring alignment with the design-stage claims" (EDGE User Guide, Section 4.1: Insulation Measures). Thus, manufacturer's data sheets (Option C) are required at the post-construction stage.
Reference:EDGE Certification Protocol, Section 3.4: Post-Construction Requirements, Section 3.2: Audit Requirements; EDGE User Guide Version 2.1, Section 6.2: Documentation Requirements, Section 4.1:
Insulation Measures.

NEW QUESTION # 56
Which of the following does NOT contribute to an EDGE Auditor maintaining their Auditor status?

A. Attending refresher training.
B. Performing at least one project site audit every two years.
C. Studying the EDGE user guides as and when they are updated.
D. Retaking the auditor exam.

Answer: D

Explanation:
Maintaining EDGE Auditor status involves specific requirements to ensure ongoing competence. The EDGE Expert and Auditor Protocols outline these requirements: "To maintain their status, EDGE Auditors must perform at least one project site audit every two years, attend refresher training as required by IFC, and stay updated by studying the EDGE user guides and protocols as they are revised" (EDGE Expert and Auditor Protocols, Section 5.1: Maintaining Auditor Status). Option A (performing at least one project site audit every two years) is explicitly required to demonstrate active engagement. Option B (studying the EDGE user guides as updated) is also necessary to stay current with program changes. Option D (attending refresher training) is mandated to ensure continued education. However, Option C (retaking the auditor exam) is not a requirement for maintaining status: "Once certified, EDGE Auditors are not required to retake the exam to maintain their status, though they may need to retake it if their certification lapses or if significant program changes occur" (EDGE Expert and Auditor Protocols, Section 5.2: Recertification Conditions). Since the question focuses on maintaining status, not recertification after lapse, retaking the exam is not a standard requirement. Thus, retaking the auditor exam (Option C) does not contribute to maintaining Auditor status.
Reference:EDGE Expert and Auditor Protocols, Section 5.1: Maintaining Auditor Status, Section 5.2:
Recertification Conditions.

NEW QUESTION # 57
Who is responsible for paying the EDGE certification fees?

A. EDGE Operations and Management Team
B. EDGE Client
C. EDGE Expert
D. Local Green Building Council

Answer: B

Explanation:
The EDGE certification process involves various fees, including registration and certification fees, and assigns clear responsibility for their payment. The EDGE Certification Protocol explicitly states: "The EDGE Client, typically the project owner or developer, is responsible for paying the EDGE certification fees, which include the registration fee to enter the project into the system and the certification fee upon successful completion of the audit process. These fees are paid to the EDGE Certification Provider to cover the costs of certification" (EDGE Certification Protocol, Section 2.1: Registration). Option B, EDGE Client, directly aligns with this responsibility, as the Client is the party seeking certification and thus bears the financial obligation. Option A (EDGE Expert) is incorrect, as the Expert provides consultancy services and is typically paid by the Client, not responsible for certification fees: "The EDGE Expert may assist with the certification process, but the Client is responsible for all fees associated with registration and certification" (EDGE Expert and Auditor Protocols, Section 2.1: Roles of EDGE Expert). Option C (EDGE Operations and Management Team) is also incorrect, as this team oversees the EDGE program, not individual project fees: "The EDGE Operations and Management Team manages the program at a global level and does not handle or pay project- specific certification fees" (EDGE Certification Protocol, Section 1.3: Program Structure). Option D (Local Green Building Council) may act as a Certification Provider in some regions, but they receive the fees, not pay them: "Local Green Building Councils, such as those partnered with GBCI, may serve as Certification Providers, but the payment of fees is the responsibility of the Client, not the Council" (EDGE User Guide, Section 6.1: Project Preparation). The EDGE User Guide further reinforces: "The Client must budget for andpay all EDGE certification fees, ensuring timely payment to the Certification Provider to avoid delays in the certification process" (EDGE User Guide, Section 6.1: Project Preparation). The EDGE Certification Protocol adds: "Certification fees are typically invoiced by the Certification Provider, such as GBCI, and must be settled by the Client to receive the final EDGE certificate" (EDGE Certification Protocol, Section 3.3:
Certification Decision). Thus, the EDGE Client (Option B) is responsible for paying the certification fees.
Reference:EDGE Certification Protocol, Section 2.1: Registration, Section 1.3: Program Structure, Section
3.3: Certification Decision; EDGE Expert and Auditor Protocols, Section 2.1: Roles of EDGE Expert; EDGE User Guide Version 2.1, Section 6.1: Project Preparation.

NEW QUESTION # 58
A hotel developer is planning a project. The specifications are based on corporate design standards for water fittings, lighting, heating, and air-conditioning. The EDGE Base Case will:

A. Be verified on a case-by-case basis for the hotel chain.
B. Be adapted to accommodate corporate specifications.
C. Use the local typical building practices or code.
D. Not be suitable for certification of this project.

Answer: C

Explanation:
The EDGE software's Base Case is a standardized benchmark that does not adjust to project-specific corporate standards but reflects local norms. The EDGE User Guide states: "The Base Case in EDGE software is automatically generated based on local typical building practices and, where applicable, national building codes for the selected typology and location. It does not incorporate project-specific corporate standards or custom specifications, ensuring a consistent baseline for comparison" (EDGE User Guide, Section 2.3: Using the EDGE App). In this scenario, the hotel developer's corporate design standards for water fittings, lighting, heating, and air-conditioning are specific to the project, but the EDGE Base Case will still use local typical practices or codes (Option C). Option A is incorrect, as the project can still be certified using the standard Base Case. Option B is wrong because the Base Case does not adapt to corporate specifications. Option D is also incorrect, as the Base Case is not verified on a case-by-case basis for specific hotel chains but is standardized for the region and typology.
Reference:EDGE User Guide Version 2.1, Section 2.3: Using the EDGE App; EDGE Methodology Report Version 2.0, Section 3.1: Base Case Determination.

NEW QUESTION # 59
An EDGE Auditor has received initial documentation from a Client which implies that measures not selected on the downloaded PDF can be claimed. What should the Auditor do?

A. As submission documents are correct, the Auditor should ignore the error on PDF.
B. The Auditor should ask for advice from the EDGE Partner and then take action.
C. The Auditor should modify the self-assessment and submit the project for certification.
D. Inform the Client to update the EDGE software and prepare a new PDF.

Answer: D

Explanation:
The EDGE audit process requires that the documentation submitted by the Client accurately reflects the self- assessment in the EDGE software, ensuring consistency and transparency. The EDGE Expert and Auditor Protocols address discrepancies in documentation: "If an EDGE Auditor identifies a discrepancy between the submitted documentation and the self-assessment PDF, such as measures being claimed that were not selected in the EDGE software, the Auditor must inform the Client to update the EDGE software to reflect the correct measures and prepare a new PDF for submission. This ensures that the audit is based on an accurate representation of the project's claims" (EDGE Expert and Auditor Protocols, Section 4.2: Evidence Verification). Option C, inform the Client to update the EDGE software and prepare a new PDF, directly aligns with this protocol, as it corrects the error at the source and ensures the self-assessment matches the claimed measures. Option A (ask for advice from the EDGE Partner) is unnecessary, as the protocol provides clear guidance: "Auditors are expected to follow standard procedures for discrepancies without needing to consult the EDGE Partner, unless the issue involves a policy interpretation beyond the protocols" (EDGE Expert and Auditor Protocols, Section 4.1: Audit Process). Option B (modify the self-assessment and submit) is unethical and prohibited, as Auditors cannot alter the Client's submission: "The Auditor must not modify the Client's self-assessment in the EDGE software, as this compromises the independence of the audit process; the Client is responsible for updating the assessment" (EDGE Certification Protocol, Section 3.2:
Audit Requirements). Option D (ignore the error on PDF) is also incorrect, as ignoring discrepancies violates audit integrity: "All discrepancies between the PDF and submitted documents must be resolved before the audit proceeds, as ignoring errors could lead to incorrect certification outcomes" (EDGE Expert and Auditor Protocols, Section 4.2: Evidence Verification). The EDGE User Guide further reinforces: "The self- assessment PDF must accurately reflect the measures selected in the EDGE software, and any mismatch requires the Client to revise the assessment to ensure a fair and transparent audit" (EDGE User Guide, Section
6.2: Documentation Requirements). Thus, the Auditor should inform the Client to update the software and prepare a new PDF (Option C).
Reference:EDGE Expert and Auditor Protocols, Section 4.2: Evidence Verification, Section 4.1: Audit Process; EDGE Certification Protocol, Section 3.2: Audit Requirements; EDGE User Guide Version 2.1, Section 6.2: Documentation Requirements.

NEW QUESTION # 60
To maintain their licensed status, what must EDGE Auditors do?

A. Attend refresher training for at least two hours every two years.
B. Undertake at least one building project audit every two years.
C. Attend refresher training for at least two hours every three years.
D. Undertake at least one building project audit every three years.

Answer: B

Explanation:
EDGE Auditors must meet specific requirements to maintain their licensed status, ensuring they remain active and competent in their role. The EDGE Expert and Auditor Protocols provide detailed guidance: "To maintain their licensed status, EDGE Auditors must undertake at least one building project audit every two years. This requirement ensures that Auditors remain actively engaged in the certification process and maintain their practical experience in verifying EDGE projects" (EDGE Expert and Auditor Protocols, Section 5.1:
Maintaining Auditor Status). Option A, undertake at least one building project audit every two years, directly aligns with this requirement. Option B (attend refresher training for at least two hours every two years) and Option C (attend refresher training for at least two hours every three years) are incorrect, as the protocols specify a different training requirement: "EDGE Auditors must attend refresher training as required by IFC, typically every three years, but the duration is not specified as a minimum of two hours; the focus is on completing the training, not the exact hours" (EDGE Expert and Auditor Protocols, Section 5.1: Maintaining Auditor Status). Option D (undertake at least one building project audit every three years) is also incorrect, as the required frequency is every two years, not three: "A three-year interval for audits does not meet the requirement of one audit every two years, which is necessary to ensure ongoing competence" (EDGE Expert and Auditor Protocols, Section 5.1: Maintaining Auditor Status). The EDGE User Guide supports this by stating: "Auditors maintain their status by conducting at least one audit every two years, ensuring they stay familiar with EDGE standards and procedures through active practice" (EDGE User Guide, Section 6.5:
Working with EDGE Auditors). Additionally, the protocols note: "Failure to conduct an audit within two years may result in a lapse of Auditor status, requiring recertification through additional training or re- examination" (EDGE Expert and Auditor Protocols, Section 5.2: Recertification Conditions). Thus, undertaking at least one audit every two years (Option A) is the correct requirement for maintaining EDGE Auditor status.
Reference:EDGE Expert and Auditor Protocols, Section 5.1: Maintaining Auditor Status, Section5.2:
Recertification Conditions; EDGE User Guide Version 2.1, Section 6.5: Working with EDGE Auditors.

NEW QUESTION # 61
What or who determines the baseline assumptions in EDGE?

A. EDGE software users
B. EDGE Auditors
C. Market survey of best construction practices
D. Market survey of typical construction practices

Answer: D

Explanation:
The baseline assumptions in EDGE software, known as the Base Case, are critical for calculating resource savings and are determined using standardized data. The EDGE Methodology Report explains: "Baseline assumptions in EDGE, referred to as the Base Case, are determined by market surveys of typical construction practices in the project's country, reflecting common materials, systems, and design practices for the selected typology and location" (EDGE Methodology Report Version 2.0, Section 3.1: Base Case Determination).
Option C, market survey of typical construction practices, aligns with this methodology. Option A (EDGE software users) is incorrect, as users do not set the baseline; they input project-specific data. Option B (EDGE Auditors) is also incorrect, as auditors verify compliance, not establish baselines. Option D (market survey of best construction practices) is wrong because EDGE uses typical practices, not best practices, to create a realistic benchmark, as clarified in the EDGE User Guide: "The Base Case reflects typical local practices, not best practices, to ensure a fair comparison for resource savings" (EDGE User Guide, Section 2.3: Using the EDGE App).
Reference:EDGE Methodology Report Version 2.0, Section 3.1: Base Case Determination; EDGE User Guide Version 2.1, Section 2.3: Using the EDGE App.

NEW QUESTION # 62
Energy consumption calculations in EDGE are based on:

A. Cooling and heating degree days.
B. Quasi-steady state calculations.
C. Hourly simulation.
D. Steady state calculations.

Answer: D

Explanation:
The EDGE software uses a simplified approach to calculate energy consumption, focusing on accessibility and speed for users in emerging markets. The EDGE Methodology Report explains the calculation method:
"Energy consumption in EDGE is calculated using steady state calculations, which assume constant conditions over a period to estimate energy use for heating, cooling, lighting, and other systems. This method simplifies the modeling process while providing sufficiently accurate results for the purposes of EDGE certification" (EDGE Methodology Report Version 2.0, Section 5.2: Energy Calculation Methods). Option B, steady state calculations, directly matches this approach. Option A (hourly simulation) is incorrect, as EDGE does not use dynamic simulations: "EDGE does not employ hourly simulations, which are more complex and resource-intensive, as the goal is to provide a fast and simple tool" (EDGE User Guide, Section 2.1: EDGE Software Overview). Option C (quasi-steady state calculations) is also incorrect, as EDGE does not use this intermediate method: "Quasi-steady state methods, which account for some dynamic effects, are not used in EDGE to maintain simplicity" (EDGE Methodology Report Version 2.0, Section 5.2: Energy Calculation Methods). Option D (cooling and heating degree days) is a metric used to estimate climate impact, not the calculation method: "Degree days are inputs to the steady state calculations, not the method itself" (EDGE User Guide, Section 3.2: Climate Data Inputs). Thus, steady state calculations (Option B) are used for energy consumption in EDGE.
Reference:EDGE Methodology Report Version 2.0, Section 5.2: Energy Calculation Methods; EDGE User Guide Version 2.1, Section 2.1: EDGE Software Overview, Section 3.2: Climate Data Inputs.

NEW QUESTION # 63
Which of the following describes a more efficient lamp?

A. Lower watts/m²
B. Lower wattage
C. Longer life
D. More lumens/watt

Answer: D

Explanation:
Lamp efficiency in EDGE is a key factor in reducing energy consumption for lighting, a critical green building design strategy. The EDGE User Guide defines lamp efficiency: "In EDGE, a moreefficient lamp is one that provides higher lumens per watt, meaning it produces more light output (lumens) for the same electrical input (watts). This metric, known as luminous efficacy, is used to evaluate lighting efficiency measures like EEM22 - Efficient Lighting for Internal Areas" (EDGE User Guide, Section 4.4: Lighting Efficiency Measures). Option A, more lumens/watt, directly aligns with this definition, as it indicates greater efficiency in converting electricity to light. Option B (lower watts/m²) refers to lighting power density, which is a design metric, not a lamp characteristic: "Watts/m² is a measure of lighting power density for a space, not the efficiency of an individual lamp" (EDGE Methodology Report Version 2.0, Section 5.4: Lighting Calculations). Option C (longer life) relates to durability, not efficiency: "Lamp life affects maintenance costs but is not a direct measure of energy efficiency in EDGE" (EDGE User Guide, Section 4.4: Lighting Efficiency Measures). Option D (lower wattage) alone does not indicate efficiency, as a lamp with lower wattage but poor light output would be less efficient: "Lower wattage must be paired with adequate lumens to improve efficiency" (EDGE Methodology Report Version 2.0, Section 5.4: Lighting Calculations). Thus, more lumens/watt (Option A) describes a more efficient lamp.
Reference:EDGE User Guide Version 2.1, Section 4.4: Lighting Efficiency Measures; EDGE Methodology Report Version 2.0, Section 5.4: Lighting Calculations.

NEW QUESTION # 64
Increasing the glazing area of an office building will NOT impact which of the following?

A. Lighting energy
B. Cooling demand
C. Hot water demand
D. Heating demand

Answer: C

Explanation:
Increasing the glazing area in an office building affects various aspects of energy consumption due to changes in heat gain, heat loss, and natural light availability, but it does not influence all buildingsystems. The EDGE User Guide explains the impacts of glazing: "Increasing the glazing area (window-to-wall ratio, WWR) in an office building typically increases cooling demand due to higher solar heat gain, increases heating demand in colder climates due to greater heat loss through windows, and reduces lighting energy by allowing more natural daylight, assuming proper daylighting design" (EDGE User Guide, Section 3.5: Passive Design Strategies). Option A (cooling demand) is affected, as more glazing increases solar heat gain: "Higher WWR leads to greater cooling loads in hot climates due to increased solar radiation entering the building" (EDGE Methodology Report Version 2.0, Section 5.2: Energy Calculation Methods). Option B (heating demand) is also impacted, particularly in cooler climates: "Larger glazing areas increase heat loss in cold climates, raising heating demand due to the lower thermal resistance of windows compared to walls" (EDGE User Guide, Section 4.1: Insulation Measures). Option C (lighting energy) is affected, as more glazing can reduce the need for artificial lighting: "Increased glazing can lower lighting energy by enhancing daylight penetration, provided glare is controlled" (EDGE User Guide, Section 4.4: Lighting Efficiency Measures). However, Option D (hot water demand) is not impacted by glazing area, as hot water use is tied to occupant activities (e.
g., showers, cleaning) rather than building envelope design: "Hot water demand in EDGE is determined by occupant use patterns, such as the number of showers or laundry cycles, and is not influenced by glazing area or WWR" (EDGE Methodology Report Version 2.0, Section 4.2: Water Savings Calculations). The EDGE User Guide further confirms: "Glazing area impacts energy-related metrics like cooling, heating, and lighting, but has no direct effect on hot water demand, which is calculated separately based on usage assumptions" (EDGE User Guide, Section 5.2: Water Efficiency Measures). Therefore, increasing glazing area does not impact hot water demand (Option D).
Reference:EDGE User Guide Version 2.1, Section 3.5: Passive Design Strategies, Section 4.1: Insulation Measures, Section 4.4: Lighting Efficiency Measures, Section 5.2: Water Efficiency Measures; EDGE Methodology Report Version 2.0, Section 5.2: Energy Calculation Methods, Section 4.2: Water Savings Calculations.

NEW QUESTION # 65
......

EDGE-Expert Exam Dumps Pass with Updated 2025 Certified Exam Questions: https://troytec.validtorrent.com/EDGE-Expert-valid-exam-torrent.html

Released EDGE EDGE-Expert Updated Questions PDF [Q43-Q65]

Related Articles