2024 Easy Success Cisco 350-401 Exam in First Try
Best 350-401 Exam Dumps for the Preparation of Latest Exam Questions
Cisco 350-401 Exam covers a wide range of topics, including network architecture, virtualization, infrastructure, security, automation, and network assurance. Candidates are required to have a good understanding of these topics and must be able to apply their knowledge to solve real-world problems. 350-401 exam consists of multiple-choice questions and simulation-based questions, which test the candidates' ability to configure and troubleshoot network devices. To pass the exam, candidates must score at least 825 out of the total of 1000 points.
Cisco 350-401 certification exam is a critical certification for IT professionals who want to demonstrate their mastery of enterprise network technologies. 350-401 exam covers a wide range of topics, including network automation, network security, and network design. Individuals who pass the exam can demonstrate their expertise in network engineering and gain a competitive advantage in the job market.
NEW QUESTION # 161
Refer to the exhibit.
Refer to the exhibit. Which two commands are needed to allow for full reachability between AS 1000 and AS 2000? (Choose two)
- A. R1#network 19.168.0.0 mask 255.255.0.0
- B. R2#network 19.168.0.0 mask 255.255.0.0
- C. R2#network 209.165.201.0 mask 255.255.192.0
- D. R1#no network 10.0.0.0 255.255.255.0
- E. R2#no network 10.0.0.0 255.255.255.0
Answer: B,E
NEW QUESTION # 162
Which function does a fabric wireless LAN controller perform In a Cisco SD-Access deployment?
- A. manages fabric-enabled APs and forwards client registration and roaming information to the Control Plane Node
- B. is dedicated to onboard clients in fabric-enabled and nonfabric-enabled APs within the fabric
- C. performs the assurance engine role for both wired and wireless clients
- D. coordinates configuration of autonomous nonfabric access points within the fabric
Answer: A
Explanation:
Explanation
Fabric Enabled WLC:
Fabric enabled WLC is integrated with LISP control plane. This WLC is responsible for AP image /Config, Radio Resource Management, Client Session management and roaming and all other wireless control plane functions.
For WLC Fabric Integration:
* Wireless Client MAC address is used as EID
* It inform about Wireless MAC address with its other information like SGT and Virtual Network Information
* VN information is mapped to VLAN on FEs
* WLC is responsible for updating Host Database tracking DB with roaming information
NEW QUESTION # 163
Refer to the exhibit.
An engineer must create a configuration that executes the show run command and then terminates the session when user CCNP legs in. Which configuration change is required''
- A. Add the autocommand keyword to the username command
- B. Add the autocommand keyword to the aaa authentication command
- C. Add the access-class keyword to the aaa authentication command
- D. Add the access-class keyword to the username command
Answer: A
NEW QUESTION # 164
Drag and drop the snippets onto the blanks within the code to construct a script that configures BGP according to the topology. Not all options are used, and some options may be used twice.
Answer:
Explanation:
NEW QUESTION # 165
Drag and drop the LISP components from the left onto the function they perform on the right. Not all options are used.
Answer:
Explanation:
Explanation
+ accepts LISP encapsulated map requests: LISP map resolver
+ learns of EID prefix mapping entries from an ETR: LISP map server
+ receives traffic from LISP sites and sends it to non-LISP sites: LISP proxy ETR
+ receives packets from site-facing interfaces: LISP ITR
Explanation
ITR is the function that maps the destination EID to a destination RLOC and then encapsulates the original packet with an additional header that has the source IP address of the ITR RLOC and the destination IP address of the RLOC of an Egress Tunnel Router (ETR).
After the encapsulation, the original packet become a LISP packet.
ETR is the function that receives LISP encapsulated packets, decapsulates them and forwards to its local EIDs. This function also requires EID-to-RLOC mappings so we need to point out an "map-server" IP address and the key (password) for authentication.
A LISP proxy ETR (PETR) implements ETR functions on behalf of non-LISP sites. A PETR is typically used when a LISP site needs to send traffic to non-LISP sites but the LISP site is connected through a service provider that does not accept no routable EIDs as packet sources. PETRs act just like ETRs but for EIDs that send traffic to destinations at non-LISP sites.
Map Server (MS) processes the registration of authentication keys and EID-to-RLOC mappings. ETRs sends periodic Map-Register messages to all its configured Map Servers.
Map Resolver (MR): a LISP component which accepts LISP Encapsulated Map Requests, typically from an ITR, quickly determines whether or not the destination IP address is part of the EID namespace
NEW QUESTION # 166
How does the RIB differ from the FIB?
- A. The FIB maintains network topologies and routing tables. The RIB is a Iist of routes to particular network destinations.
- B. The RIB is used to create network topologies and routing tables. The FIB is a list of routes to particular network destinations.
- C. The RIB includes many routes to the same destination prefix. The FIB contains only the best route
- D. The FIB includes many routes a single destination. The RIB is the best route to a single destination.
Answer: B
Explanation:
NEW QUESTION # 167
Drag and drop me automation characteristics from the left onto the appropriate tools on the right.
Answer:
Explanation:
NEW QUESTION # 168
An engineer is working with the Cisco DNA Center API Drag and drop the methods from the left onto the actions that they are used for on the right.
Answer:
Explanation:
NEW QUESTION # 169
Refer to the exhibit.
Assuming all links are functional, which path does PC1 take to reach DSW1?
- A. PC1 goes from ALSW1 to DSW2 to Core to DSW1
- B. PC1 goes from ALSW1 to DSW2 to DSW1
- C. PC1 goes form ALSW1 to DSW2 to ALSW2 to DSW1
- D. PC1 goes from ALSW1 to DSW1
Answer: B
Explanation:
Explanation
In the topology above, we see DSW2 has lowest priority 24576 so it is the root bridge for VLAN 10 so surely all traffic for this VLAN must go through it. All of DSW2 ports must be in forwarding state. And:
+ The direct link between DSW1 and ALSW1 is blocked by STP. + The direct link between DSW1 and ALSW2 is also blocked by STP.
Therefore PC1 must go via this path: PC1 -> ALSW1 -> DSW2 -> DSW1.
NEW QUESTION # 170
Drag and drop the wireless elements on the left to their definitions on the right.
Answer:
Explanation:
NEW QUESTION # 171
Based on this interface configuration, what is the expected state of OSPF adjacency?
- A. not established
- B. 2WAY/DROTHER on both routers
- C. FULL?BDR on R1 and FULL/BDR on R2
- D. Full on both routers
Answer: A
NEW QUESTION # 172
Drag and drop the characteristics from the left to the correct Infrastructure deployment types on the right.
Answer:
Explanation:
NEW QUESTION # 173
Drag and drop the REST API authentication methods from the left onto their descriptions on the right.
Answer:
Explanation:
NEW QUESTION # 174
Refer to me exhibit.
Refer to the exhibit Which configuration enables password checking on the console line, using only a password?
A)
B)
C)
- A. Option B
- B. Option C
- C. Option D
- D. Option A
Answer: A
NEW QUESTION # 175
Which method creates an EEM applet policy that is registered with EEM and runs on demand or manually?
- A. event manager applet ondemand
event register
action 1.0 syslog priority critical msg 'This is a message from ondemand' - B. event manager applet ondemand
event manual
action 1.0 syslog priority critical msg 'This is a message from ondemand' - C. event manager applet ondemand
event none
action 1.0 syslog priority critical msg 'This is a message from ondemand' - D. event manager applet ondemand
action 1.0 syslog priority critical msg 'This is a message from ondemand'
Answer: C
Explanation:
Explanation
An EEM policy is an entity that defines an event and the actions to be taken when that event occurs. There are two types of EEM policies: an applet or a script. An applet is a simple form of policy that is defined within the CLI configuration. answer 'event manager applet ondemand event register action 1.0 syslog priority critical msg 'This is a message from ondemand'
<="" p="" style="box-sizing: border-box;">
There are two ways to manually run an EEM policy. EEM usually schedules and runs policies on the basis of an event specification that is contained within the policy itself. The event none command allows EEM to identify an EEM policy that can be manually triggered. To run the policy, use either the action policy command in applet configuration mode or the event manager run command in privileged EXEC mode.
Reference: https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/eem/configuration/xe-3s/eem-xe-3s-book/eem-policy-cli.html
NEW QUESTION # 176
When a wireless client roams between two different wireless controllers, a network connectivity outage is experience for a period of time. Which configuration issue would cause this problem?
- A. All of the controllers within the mobility group are using the same virtual interface IP address.
- B. Not all of the controllers in the mobility group are using the same mobility group name.
- C. Not all of the controllers within the mobility group are using the same virtual interface IP address.
- D. All of the controllers in the mobility group are using the same mobility group name.
Answer: C
Explanation:
A prerequisite for configuring Mobility Groups is "All controllers must be configured with the
same virtual interface IP address". If all the controllers within a mobility group are not using
the same virtual interface, inter-controller roaming may appear to work, but the handoff
does not complete, and the client loses connectivity for a period of time. -> Answer B is
correct.
Reference:
b_cg85/mobility_groups.html
NEW QUESTION # 177
Refer to the exhibit.
An engineer must ensure that all traffic leaving AS 200 will choose Link 2 as an entry point. Assuming that all BGP neighbor relationships have been formed and that the attributes have not been changed on any of the routers, which configuration accomplish task?
- A. Option C
- B. Option A
- C. Option B
- D. Option D
Answer: B
NEW QUESTION # 178
Drag and drop the description from the left onto the correct QoS components on the right.
Answer:
Explanation:
NEW QUESTION # 179
Drag and drop the Qos mechanisms from the left to the correct descriptions on the right
Answer:
Explanation:
Explanation
NEW QUESTION # 180
......
Cisco 350-401 exam is part of the new CCNP Enterprise certification path and is designed for network engineers who are interested in advancing their skills and knowledge of Cisco Enterprise Network technologies. 350-401 exam is essential for professionals who want to take their career to the next level and become experts in implementing and managing Cisco Enterprise Networks.
350-401 Study Material, Preparation Guide and PDF Download: https://troytec.validtorrent.com/350-401-valid-exam-torrent.html