Get The Important Preparation Guide With C-THR92-2405 Dumps
Get Totally Free Updates on C-THR92-2405 Dumps PDF Questions
NEW QUESTION # 45
A table report is shared with a user. That user CANNOT see the table report in the Report Center list.
Which role-based permission has NOT been set correctly for this user?
- A. Ability to manage Tiles and Dashboards
- B. Run Report access to the domain
- C. Access to Insights
- D. Create Report access to the domain
Answer: B
NEW QUESTION # 46
User A maintains a canvas report of employee contact information. User A leaves the company. Another report designer, user B, is assigned the responsibility to maintain the report, but currently CANNOT modify the report.
How do you allow user B to modify only this report?
- A. Update the reports' sharing to include user B..
- B. Assign User B the Access All Reports permission.
- C. Edit user B's WFA Role configuration.
- D. Edit authorship of the report.
Answer: A
NEW QUESTION # 47
You want to join two tables, A and B, and you want to include all rows from Table A, and only matching rows from Table B. Which join type must you use?
- A. Outer
- B. Inner
- C. Left
Answer: C
NEW QUESTION # 48
What do you need to do to configure a direct manager's ability to lock an employee's goal plan in Goal Management? Note: There are 3 correct answers to this question.
- A. Add the "obj-edit" in a performance form template XML.
- B. Define <obj-plan-states> in the goal plan template XML.
- C. Give the direct manager permission to access the employee
- D. Add < permission for=
- E. Configure the <plan-layout> to include switch buttons.
Answer: B,C,D
NEW QUESTION # 49
When using Report Center, what permissions are required to create a canvas report on Employee Profile data using the Detailed Reporting tool? Note: There are 3 correct answers to this question.
- A. Canvas Designer Admin
- B. Run Report: Employee Profile
- C. Create Reports: Employee Profile
- D. Report Center
- E. Canvas Designer
Answer: C,D,E
NEW QUESTION # 50
Why would you export table report definitions? Note: There are 2 correct answers to this question.
- A. To schedule reports for offline execution
- B. To support report version control
- C. To move reports between company instances
- D. To distribute reports to report consumers
Answer: B,C
NEW QUESTION # 51
You are creating a query for a historical compensation story report in Query Designer. You have added the Job Information table to the query, configured a scope filter, and previewed the result to verify you are returning the appropriate employees.
You add the related table Compensation to the query.
When you preview the query, you only get the current compensation information for the employees.
Why do you only receive the current records? Note: There are 2 correct answers to this question.
- A. The compensation table time filter is set to: As of Date > Dynamic Date: Today.
- B. The compensation table time filter is set to: Same Filter as First Table.
- C. The Job information table time filter is set to: As of Date > Dynamic Date: Today.
- D. The Query Advanced Filter is set to: Job Information effective start date equal to Dynamic Date:Today.
Answer: B,C
NEW QUESTION # 52
Which options are available in Form Template Settings to change in-progress forms?
Note: There are 2 correct answers to this question.
- A. Display circle icon as rating
- B. Enable Delete button
- C. Disable Delete button
- D. Hide numeric rating values (only show text labels)
Answer: B,C
NEW QUESTION # 53
What are the steps to create and assign a date filter to a tile?
- A. 1. Enable the date filter in the tile.
2. Access Date Options.
3. Configure date type to Date Range.
4. Configure the date from/date to.
5. Configure end user free selection of date range. - B. 1. Enable the date filter in the tile.
2. Create a new date range.
3. Configure the Name, label, and date from/date to.
4. Configure end user free selection of date range. - C. 1. Create a new date range.
2. Configure the Name, label, and date from/date to.
3. Enable the date filter in the tile.
4. Configure end user free selection of date range. - D. 1. Access Date Options.
2. Configure the date type to Date Range.
3. Configure the date from/date to.
4. Enable the date filter in the tile.
5. Configure end user free selection of date range.
Answer: C
NEW QUESTION # 54
Which rating is the rating of record in a Performance Management template configured with a Performance/Potential summary, an Overall summary, and a Customized Weighted Rating summary?
- A. The calculated rating from the Overall Summary section
- B. The manual rating from Performance/Potential summary
- C. The manual rating from the Overall Summary section
- D. The manual rating from Customized Weighted Rating section
Answer: C
NEW QUESTION # 55
You want to create a report that returns only employees who were born in 1961. You also want to enable the person who runs the report to specify a different birth year.
How can you achieve this? Note: There are 2 correct answers to this question.
- A. 1. Select Manage Query Filters.
2. Expand Personal Information table and select Date of Birth.
3. Select Greater than or equal to from the operator list.
4. Set Custom filter date to 1/1/1961.
5. Select OK and then select Add.
6. Expand Personal Information table and select Date of Birth.
7. Select less than or equal to from the operator list.
8. Set Custom filter date to 12/31/1961.
9. Select OK. - B. 1. Select Date Options from the Toolbar.
2. Set Date Type to Show All.
3. Select Manage Run Time Filters from the Toolbar.
4. Expand Personal Information table.
5. Select Date of Birth column.
6. Select OK. - C. 1. Select Date Options from the Toolbar.
2. Set Date Type to Date Range (On Start Date).
3. Set From date to 1/1/1961 and To date to 12/31/1961.
4. Set Use Custom Columns.
5. Select Date of Birth from Start Date Column.
6. Set Selectable At Runtime. - D. 1. Select Date Options from the Toolbar.
2. Set Date Type to As of Date.
3. Set As of Date to 1/1/1961.
4. Set Use Custom Columns.
5. Select Date of Birth from Start Date Column.
6. Select Date of Birth from End Date Column.
7. Set Selectable At Runtime.
Answer: A,C
NEW QUESTION # 56
You need to create a chart of type Indicator: Numeric Point that displays the following output: count of employees with the gender male divided by the count of employee with the gender female.
The chart can then be filtered for different departments. What calculation is required to create the metric?
- A. In Chart Builder, use a calculation of type: Calculated Measure.
- B. In Chart Builder, use a calculation of type: Restricted Measure.
- C. In Chart Builder, use a calculation of type: Aggregation.
- D. In Query Builder, use a calculated column.
Answer: A
NEW QUESTION # 57
For a report without Optimized Design Experience enabled, how do you configure the Builder to display the chart in the screenshot in a story report? Note: There are 3 correct answers to this question.
- A. Set Color to Gender.
- B. Set Dimensions to Gender.
- C. Set Color to Pay Grade.
- D. Set Measures to EOP Headcount.
- E. Set Dimensions to Pay Grade.
Answer: A,B,E
NEW QUESTION # 58
What is a prerequisite for using the SuccessFactors standard canvas report templates?
- A. The templates must have been downloaded from the Success Store.
- B. The customer must have enabled the templates in Provisioning.
- C. The customer must have licensed SuccessFactors Employee Central.
- D. The templates must have been loaded within Report Center.
Answer: A
Explanation:
Topic: 5
Managing Clean Core
NEW QUESTION # 59
What can an administrator do when accessing the Delete Continuous Feedback page?
Note: There are 2 correct answers to this question.
- A. The administrator can only delete feedback given in the last three months.
- B. The administrator CANNOT restore feedback once the feedback is deleted.
- C. The administrator can delete only feedback given or received by active users.
- D. The administrator can access all information, including feedback content from others.
Answer: B,C
NEW QUESTION # 60
In Query Designer, you create a query that contains 100 columns from 25 tables and that returns 12000 rows for a total of 1.2 million cells. You are NOT able to save the query because you have exceeded a maximum.
Which maximum did you exceed?
- A. Number of cells
- B. Number of columns
- C. Number of tables
- D. Number of rows
Answer: B
NEW QUESTION # 61
Your company is performing FX balance sheet hedging. What data is captured with the Take Snapshot Balance Sheet FX Risk SAP Fiori app?Note: There are 2 correct answers to this question.
- A. Hedge quotas
- B. Balance sheet exposures
- C. Market data
- D. FX hedges
Answer: B
NEW QUESTION # 62
Which of the following are possible in the Ask for Feedback feature?
Note: There are 2 correct answers to this question.
- A. Ask for Feedback data, including the content of the feedback, is reportable in Table Reports.
- B. The Ask for Feedback system label in US English can be customized from Text Replacement.
- C. Ask for Feedback responses can be displayed in the Supporting Information pod in the performance form.
- D. Ask for Feedback responses in Team Overview are always visible to both the manager and the matrix manager.
Answer: B,C
NEW QUESTION # 63
What can an administrator do with the Launch Forms tool?
Note: There are 3 correct answers to this question.
- A. Edit introduction texts for custom sections.
- B. Remove one of the form sections.
- C. Set specific form template dates for the forms being launched.
- D. Select employees based on filters.
- E. Disable the Ask for Feedback functionality for the forms being launched.
Answer: A,C,D
NEW QUESTION # 64
What are some SAP recommended guiding principles to achieve clean core operations? Note: There are
3 correct answers to this question.
- A. Establish an organizational structure, technical foundation, and transformation methodology for clean core.
- B. Integrate clean core practices in the end-to-end value process chain.
- C. Establish regular housekeeping tasks and procedures.
- D. Establish release management.
- E. Define roles and responsibilities as part of a process transformation office.
Answer: A,D,E
NEW QUESTION # 65
Which of the following options in 360 Reviews can be controlled from Form Template Settings?
Note: There are 2 correct answers to this question.
- A. Hide the Decline to Participate button on the 360 form.
- B. Remove participants after 360 evaluation starts.
- C. Allow managers to select external raters themselves.
- D. Hide rater identities for specific roles and steps in named 360 Reviews.
Answer: B,D
NEW QUESTION # 66
Where can you obtain the latest versions of the standard canvas report templates provided by SAP SuccessFactors?
- A. SAP PartnerEdge
- B. SAP Support Portal
- C. SAP SuccessFactors HCM Cloud Operations Portal
- D. SAP Help Portal
Answer: D
NEW QUESTION # 67
......
Prepare With Top Rated High-quality C-THR92-2405 Dumps For Success in Exam: https://troytec.validtorrent.com/C-THR92-2405-valid-exam-torrent.html